Buy Johnson Outboard Parts

Announcement

Collapse
No announcement yet.

Johnson power tilt relay clicks no function

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Johnson power tilt relay clicks no function

    I have a 1992 50hp johnson and the power tilt was working and just stopped. Both the relays under the motor cover will click when I use the motor or throttle switch. I replaced them with 2 others I had and same issue. Any ideas? Battery is hot!
    Last edited by boatman100; 06-24-2014, 09:25 PM.

  • #2
    Sounds like the electric motor for the power trim is no good. I would check the output from the relays to the motor with a test light to see if you have power going to the motor. Also check the input to the relays from the battery. you said they are clicking so you know you have power and ground for the coils inside the relays. Check for any blown fuses. If all the wiring checks out it may be the motor that's bad

    Comment

    Working...
    X