I have a 2006 Johnson J175PXSDD, and had limited water coming from pee hole. As I cannot locate a Cooling Water Flow Diagram, I have two questions.
1. When the small diameter pee hole plug is removed, the water discharge hole is then about 5/8" and with the plug screwed out tons of water will exit with engine running. Does this water come directly from the water pump, bypassing the engine, and with the plug removed the engine is not getting adequate cooling water to the heads.
2. Does anyone have a " Official Johnson/BRP " Cooling Water Flow diagram ", one that shows both thermostats, the pressure relief valve, and the exact route the water takes to go through engine and out exhaust and also out the pee hole for this specific 2006 Johnson 175 engine.
1. When the small diameter pee hole plug is removed, the water discharge hole is then about 5/8" and with the plug screwed out tons of water will exit with engine running. Does this water come directly from the water pump, bypassing the engine, and with the plug removed the engine is not getting adequate cooling water to the heads.
2. Does anyone have a " Official Johnson/BRP " Cooling Water Flow diagram ", one that shows both thermostats, the pressure relief valve, and the exact route the water takes to go through engine and out exhaust and also out the pee hole for this specific 2006 Johnson 175 engine.
Comment